How to Find Hidden Piping and Valves

It is important that you know the details of your home like the back of your hand in case you are a homeowner. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. The shutoff valves of such systems are usually located near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.